[BNM] [OT] Boiler Repair

[Richard Vahrman]

We had a similar thing happen. Pilot lights that are constantly lit, 
will eventually soot up. When this happens they will usually keep going 
so long as the gas is on, but wont re-light if it is interrupted. 
Probably means the boiler needs a good clean anyway.

We use jmp heating - 07976 765161 (part of checkatrade.com)


Dan Eastwell wrote:
> Yeah, I've tried to start it. I've been told the pressure's meant to
> be 1-1.5 bar, which it is. Beyond that I'm stumped, even if you gave
> me annotated instructions.
>
> I imagine it's fairly simple to start the thing, but I'll have to
> stump up the cash to do something that would take three minutes if I
> knew how, despite the fact this is some other idiot's fault for
> running through a gas main whilst digging up the road.
>
> On 3/9/07, Guy Tierney <guy at south.co.uk> wrote:
>   
>> Stating the obvious - have you tried the start-up procedure for the boiler?
>> - sometimes a bit temperamental. Also if its a 'pressured system' check
>> there is sufficient pressure as the boiler wont start without it.
>>
>> Gt
>>
>> on 9/3/07 12:19 pm, Dominic Mitchell at dom at happygiraffe.net wrote:
>>
>>     
>>> On Fri, Mar 09, 2007 at 10:27:23AM +0000, Dan Eastwell wrote:
>>>       
>>>> Can anyone recommend a reasonably priced efficient CORGI Gas repair
>>>> engineer who can do evenings (i.e. this evening) or weekends (i.e.
>>>> tomorrow morning)?
>>>>